For electrical and electronic equipment within scope, EU RoHS restricts hazardous substances at the homogeneous-material level. The European Commission currently lists ten restricted substances. Define the product scope and material structure before sampling. A product name or a “RoHS 3.0” label does not define the test scope.
Build the material map before sampling
A finished product can contain many homogeneous materials. A plastic housing, a metallic conductor, an insulating layer and a solder joint need to be identified at the relevant material level. Combining separable materials into one composite result can obscure which material a concentration relates to; do not substitute a whole-product average for a homogeneous-material assessment.
Scroll the table sideways to view all columns.
| Material record | Information to retain |
|---|---|
| Component and location | Part number, supplier and a photograph or drawing locating the material in the product. |
| Material identity | Material description, grade, colour or coating where relevant, and the basis for treating it as homogeneous. |
| Supplier evidence | Declarations and reports that identify the specific material or component and relevant production information. |
| Sampling plan | Materials selected for analysis, the reason for selection and how each sample maps back to the product. |
| Analytical result | Method, analyte, sample identity and reported result, with any follow-up assessment needed. |
Distinguish screening from confirmation
IEC 62321-3-1:2026, published on 6 May 2026, describes X-ray fluorescence screening of specified elements in uniform materials in electrotechnical products. Its scope includes elemental measurements such as total chromium and total bromine. An elemental screening result is a different evidence type from a compound- or species-specific determination; plan any follow-up analysis for the substance and material in question.
Request the method edition and analytical scope in the test plan. Do not describe every XRF result as a direct measurement of each restricted compound, or assume that one screening technique is a complete ten-substance analysis. The laboratory and project team should agree how inconclusive or risk-relevant screening results will be investigated.
Treat an exemption as an application-specific assessment
RoHS exemptions are set out in the relevant annexes and amendments. Match the claimed exemption to the substance, application, equipment category and applicable validity conditions for the product’s market placement. A material declaration saying only “exempt” is not enough to establish which legal provision is being relied on.
Combine test results with the product evidence
- Confirm the finished product’s scope and any relevant exclusions before defining the assessment.
- Keep the bill of materials, material map, supplier evidence and sample identifiers linked.
- Review the analytical methods and identify where further substance-specific evidence is needed.
- Record any exemption with its exact application and relevant conditions.
- Review material or supplier changes against the existing evidence before extending a previous result to new production.
Test results apply to the identified materials and configuration. They do not replace the manufacturer’s technical documentation and applicable declaration responsibilities. For an assessment plan, send SCS the product description, bill of materials and supplier evidence. Identify the materials to assess and the evidence already available before agreeing on the sample list.
Discuss chemical compliance testing
Contact SCS about a RoHS material assessment
Official references
European Commission: RoHS Directive and restricted substances